Drilling tools can become a vast amount of items. But to keep it under control, it's best to know what you are dealing with before you realize your too late and you don't have what you need.
Braces: Braces guide auger bits and drills down when you are making a whole. However, just by adding a screwdriver bit you will have converted it into a powerful screwdriver. Drilling with such a brace is done by turning the handle or center section in a circular motion. Pressure that is exerted by pressing down and turning with your hand gives it the power to drill. The head on the bit braces should be mounted on the ball bearing so it will turn easier from the rest of the brace. Usually braces are made with a ratchet control that allows you to make half turns if there is not enough room for a full circle to be completed.
Push Drills: A push drill is similiar to a push-pull screwdriver in the respect that you operate the tool by the same movement. Most models have extra space in the handle for storing drill points. A spiral threaded shaft and chuck hold the bit in place while you do the work. Typically it is best to use these only for small jobs.
Hand Drills: Hand drills are only reccommended for light work that needs to be done. A common feature on most models is an adjustable drill chuck so you can change the drill point easily. Remember you are producing the action while turning a hand crank on the frame of the drill!
Awls: Start your screw hole with an awl by tapping gently with a hammer or a soft-face mallet. They can also be used to scribe a line on soft metal or wood.
.
Questions of a Do It Yourself nature should be submitted to our
"